Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: aarch64_generic Installed-Size: 81920 Filename: ahcpd_0.53-r3_aarch64_generic.ipk Size: 24196 SHA256sum: 227e7b3321273449ab95661ca0bc84960373a0d887770fde574d44d8484da3e9 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_generic Installed-Size: 143360 Filename: alfred_2024.1-r1_aarch64_generic.ipk Size: 28803 SHA256sum: 8f2e674937d68249582d10ea37559d8a8acad8f310d7119440254030e9a26841 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: aarch64_generic Installed-Size: 71680 Filename: babel-pinger_0.1-r1_aarch64_generic.ipk Size: 4909 SHA256sum: fcde16534f86be31634150957f1763b76991756a92293af6cdcd5447b597169d Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r1 Depends: libc, libubus20231128, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: aarch64_generic Installed-Size: 153600 Filename: babeld_1.13.1-r1_aarch64_generic.ipk Size: 69286 SHA256sum: b3c312b8f07ce4827551a5538bf63ac05dd87d77f2cbaefaf427e5ab71dbb79a Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_generic Installed-Size: 143360 Filename: batctl-default_2024.1-r1_aarch64_generic.ipk Size: 47188 SHA256sum: 74f17ce26e76f488cc35832073f286593934f46f4c2acd6c2c476aa5c881b0a3 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_generic Installed-Size: 143360 Filename: batctl-full_2024.1-r1_aarch64_generic.ipk Size: 54176 SHA256sum: 452e3e52c096cce4c475bc7f8321c0b248f8cd746588005e4fa3159b648f1347 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: batctl-tiny_2024.1-r1_aarch64_generic.ipk Size: 16919 SHA256sum: 18b63a2f8a042754c587b37cab457759000315440b5d0a79ce6038831b68cb87 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_generic Installed-Size: 143360 Filename: batmand_1440-r1_aarch64_generic.ipk Size: 45838 SHA256sum: bea2c1c01d3666ebc29ebd508dfaae98bfadbd04dd9b5918f171abaab13f6b07 Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: aarch64_generic Installed-Size: 1075200 Filename: bird2_2.15.1-r1_aarch64_generic.ipk Size: 395569 SHA256sum: 44310099382f0070a21b68cfcd4fe24e7a854e85461250101293e759fb18bc64 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: aarch64_generic Installed-Size: 81920 Filename: bird2c_2.15.1-r1_aarch64_generic.ipk Size: 11105 SHA256sum: 3348792eae56fdbd18a324b2792f975a5b628d7c7b0dd2f4748ec9e74621cde5 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: aarch64_generic Installed-Size: 81920 Filename: bird2cl_2.15.1-r1_aarch64_generic.ipk Size: 9626 SHA256sum: 807637dd3de0f7f106b4971419bd81c254229bdfa077439ed64c09c6a880a6c0 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024051906-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 71680 Filename: bmx7-iwinfo_r2024051906-r1_aarch64_generic.ipk Size: 4995 SHA256sum: 46303e1f95a2eb54fc95aaa2455f782a0460cee772e856faaaed42e050a92c96 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024051906-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 71680 Filename: bmx7-json_r2024051906-r1_aarch64_generic.ipk Size: 8968 SHA256sum: 980bd72364d9df37f7707977ca5dc437266165750b9924ca9dd844208fed7907 Description: json plugin based on json-c Package: bmx7-sms Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 71680 Filename: bmx7-sms_r2024051906-r1_aarch64_generic.ipk Size: 6561 SHA256sum: 8d0dbb92d137727fd2f2341fc5008dcdad3ab2442dc7355600f9c564c276af28 Description: sms plugin Package: bmx7-table Version: r2024051906-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 71680 Filename: bmx7-table_r2024051906-r1_aarch64_generic.ipk Size: 10975 SHA256sum: 6861d28562a5853ae7f8a57618a793e7ec4b5d66725df2003a8d6b2ae02151a2 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 71680 Filename: bmx7-topology_r2024051906-r1_aarch64_generic.ipk Size: 6002 SHA256sum: cb2f08af69f9b9c67666eafb63d9868445549e854e7845a7670a16f91123a383 Description: topology plugin Package: bmx7-tun Version: r2024051906-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 81920 Filename: bmx7-tun_r2024051906-r1_aarch64_generic.ipk Size: 27631 SHA256sum: 5d257545b64ce33b5be893022d666b54460c83f04a9da48a50e6cbab1162a3f7 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024051906-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 81920 Filename: bmx7-uci-config_r2024051906-r1_aarch64_generic.ipk Size: 9608 SHA256sum: 58e723403885031f751bfa0a547dc3a8c182953348f2ea7131757499b5ac79fb Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024051906-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: aarch64_generic Installed-Size: 430080 Filename: bmx7_r2024051906-r1_aarch64_generic.ipk Size: 178523 SHA256sum: 475c530dc749bf6c75429c1f1a65fd1b27c0f1c9c5b0cf55299bfca95b697795 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: aarch64_generic Installed-Size: 768000 Filename: cjdns-tests_21.1-r6_aarch64_generic.ipk Size: 342441 SHA256sum: 727093045fe2e30788de7ed853b187b1bf0ba5a84c24d0e09a664f567c43343b Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: aarch64_generic Installed-Size: 993280 Filename: cjdns_21.1-r6_aarch64_generic.ipk Size: 404242 SHA256sum: 84a0253bc6d2ea7445b31851eb747706956beea1d4e89d7744926589ebb10252 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_generic Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_aarch64_generic.ipk Size: 1421 SHA256sum: a96910a441812b63b2398dc1ae2701ad467c52157e433d6737f638ec5c19fdc2 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_generic Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_aarch64_generic.ipk Size: 956 SHA256sum: 19e1ecee084dd3ab9fb1addc0f1c545fa175be26944c39a232c00687834bc297 Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_generic Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_aarch64_generic.ipk Size: 943 SHA256sum: 298c79f3fdf0694da09f9aa210a5e7775a793651023e1fe8c7c8a45b6bd4cfcc Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_generic Installed-Size: 296960 Filename: hnetd-nossl_2018.12.21~c4376661-r1_aarch64_generic.ipk Size: 104006 SHA256sum: 8530fded1ac0f68ce080ce1d9ce6e88fafbe2ff8b2166cd511a68d43cc0a84d3 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: aarch64_generic Installed-Size: 296960 Filename: hnetd-openssl_2018.12.21~c4376661-r1_aarch64_generic.ipk Size: 114813 SHA256sum: 1b971486485f54c74f38c270374de9151df5df50df6777c404971804d606216b Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: aarch64_generic Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_aarch64_generic.ipk Size: 6586 SHA256sum: 442d388173c0c88dc18967f1c4a3f5564de02b1c5d6da1bf46d0900b49c604f1 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: aarch64_generic Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_aarch64_generic.ipk Size: 57614 SHA256sum: 2475f98ed9927ec765630620ba4a9c90ed41bc9e4438a21022040b259079a1ca Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7782 SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d Description: OLSR2 configuration and status module Package: mcproxy Version: 2017.08.24~93b5ace4-r9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net URL: https://mcproxy.realmv6.org Architecture: aarch64_generic Installed-Size: 419840 Filename: mcproxy_2017.08.24~93b5ace4-r9_aarch64_generic.ipk Size: 130199 SHA256sum: 01f430a80a6a0de5a3eb83ab0aa878dca922c99750ecc7ef010db4d746e2cf16 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 4.0.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 112640 Filename: mesh11sd_4.0.1-r1_all.ipk Size: 23609 SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: aarch64_generic Installed-Size: 71680 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_aarch64_generic.ipk Size: 7920 SHA256sum: aa03613a0953a6f388b7e76374f4b54198971695b616f1ea00708629286d205a Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2853 SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: aarch64_generic Installed-Size: 143360 Filename: ndppd_0.2.5-r2_aarch64_generic.ipk Size: 33797 SHA256sum: 55a59cee00d8578ed8f96cb86b2b5afb941500683c08688f612787e9650b05d7 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: aarch64_generic Installed-Size: 235520 Filename: nodogsplash_5.0.2-r1_aarch64_generic.ipk Size: 50602 SHA256sum: 7d3b7400f1b216cfedb33422f9b8e117f29a58769be14bb5f300b40ef2c6ddd2 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: aarch64_generic Installed-Size: 81920 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_aarch64_generic.ipk Size: 12314 SHA256sum: fef62dd3150c304719b74b75fdbe7959bb0054868976ef710f21934bdb7f1022 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 2941 SHA256sum: ae8edac770597f265ccb578751563243b987f7992f29c613674e5eab97f98884 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 14282 SHA256sum: b09e746ca118009c45d3758a41976af85973dcc3761ea1e9521788ed88f83794 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 4893 SHA256sum: 0546c52bbe5b76e8986bd4763bf01a88474392e14903dea27d1dd8a38a3037fc Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 3376 SHA256sum: 08d14a4e709fd133b9d4bae6d1e4d735077bf23369007c3edd5b731014502500 Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 5279 SHA256sum: 01670d02dc8f431a05d0cc227e642f4218d6583266fd5d1bc62cf713f504bf1c Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 3654 SHA256sum: 732c5bce886f7ffacbd7066b6c65f2e579bccc1da3517b027728cf3293c2ce9d Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 143360 Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 31772 SHA256sum: 3afeddc9aaa47ed83fc757941aeaecf6ca846919ba0809a8c2a6c9471873f995 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 24203 SHA256sum: 2328f0a409f348053e17c5431d2f061c3cc7cb0ba358dde522b79d2be583772a Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 10911 SHA256sum: 8c2aa3f2b96782d4af6275346fafcea21503ae01d5a1fa998f634fee416705a4 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 13316 SHA256sum: 6820d5c3130f022e1d945969db4ad2e33a88dd3dbeea471e2356b311b94e53a4 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 14991 SHA256sum: 4da430ad7215673039f3ad781815d84e562fde2ff6f35f5d3464b042ea0223d1 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 10569 SHA256sum: ebf76cc5632ebd8756c765db0a2dce81670bd318aaddd2c2e1174edb61d099eb Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 3927 SHA256sum: 747cef2afaf536536f834f3bfa0717e72352cb0e9a9fc6cd2912f0580b72e58b Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 337920 Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 63362 SHA256sum: f0093dfc36d56863504c94e619ddc81728ffd5f1e1a68d6f5b05b5d19804d5ae Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 7787 SHA256sum: 2e9916f2c08b8d7a587fe9ac7311367287c8662df7510a47cc2464507f4f3587 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 11783 SHA256sum: efa899c6e9994acac55a77a4e95de5e3f2bc6b80636c079cac9097aa5df24641 Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 5778 SHA256sum: 65fe6754d52a7cdefe919ccb2c8d8aefe279a388f49de1952b549a082a24885c Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 16495 SHA256sum: f2e5641cb21b116e4e53efaebbc670428467f7d2b35757b7437d78208ecaaba2 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 71680 Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 2564 SHA256sum: c96ce8e9c4fa68ac9b9368edca1ea57f0ab5b177f979b0c5bbd67f457b519f84 Description: Watchdog plugin Package: olsrd-utils Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 10240 Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 1953 SHA256sum: 91f9015337f6df90cf08c00a76a495f1c9525e55cf5196c1ca463fa0e3099bc9 Description: Utils for OLSRD Package: olsrd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 368640 Filename: olsrd_2023.06.12~a9b3f1ac-r1_aarch64_generic.ipk Size: 146131 SHA256sum: 396838f82dbf6878c2eac49ada9abdf10d518dd50b8d2572737bde49bbef983b Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 440320 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_aarch64_generic.ipk Size: 182665 SHA256sum: 780859c5ca66fecbcc62e835034076a3d6c56ae158baeb41303037b0ea838353 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 440320 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_aarch64_generic.ipk Size: 177906 SHA256sum: f54e0c92c76c199c81457520fd6fb12f5f73ed8cb36e3b71053755f43839f8b5 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_aarch64_generic.ipk Size: 2305 SHA256sum: 4b2b3930ced1551090c417f9ec926d124806a754255f2ce958842f4befd111fb Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: aarch64_generic Installed-Size: 655360 Filename: oonf-olsrd2_2022.08.25~1cec9b21_aarch64_generic.ipk Size: 261597 SHA256sum: 2891c7eb2cd85263e49159e010dae7c0265678404723cabfb8c9b82ac6aca335 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.2.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: aarch64_generic Installed-Size: 624640 Filename: opennds_10.2.0-r1_aarch64_generic.ipk Size: 162211 SHA256sum: 0ef16aed3bcfe62d1b6148adc525885db9af2177559c5900130eb95b78d88fc8 Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: aarch64_generic Installed-Size: 225280 Filename: pimbd_2018.06.19~dbf4e591-r4_aarch64_generic.ipk Size: 88270 SHA256sum: b4a38057c8a0312e307ed5f941f73069279e59bb1246938c405b095660a8623e Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: aarch64_generic Installed-Size: 215040 Filename: prince_0.4-r3_aarch64_generic.ipk Size: 37926 SHA256sum: 69d9ef00a735c847df32d5e37197e1579411403d91b7211b8b0b5817a46d2de3 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: aarch64_generic Installed-Size: 81920 Filename: vis_2013.04.07~7710cce4-r9_aarch64_generic.ipk Size: 12075 SHA256sum: 6e12089e4934dc71b98240f05c3f94943cd58c46b88456a468e8facb86ee6245 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: aarch64_generic Installed-Size: 71680 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_aarch64_generic.ipk Size: 10037 SHA256sum: 5a4eeee209605924bd5a4db9ad5fd2600dc203c4db3b083dbfdb591f3018fd21 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.