Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips64_octeonplus.ipk
Size: 25630
SHA256sum: 986c1d3ff572dafb1ae85851aeadac91be46520b5609619cdf530a13f70c9d0d
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 153600
Filename: alfred_2024.1-r1_mips64_octeonplus.ipk
Size: 29401
SHA256sum: 9a83b05529e81d9e2703d9e277729b4949703eccc96dbe4fc65d1e9030f463fb
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips64_octeonplus.ipk
Size: 4983
SHA256sum: 5a06b509b7b96d2f1876526e67505790035f1380b97f997cbd69e98eb5d1b05d
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 225280
Filename: babeld_1.13.1-r1_mips64_octeonplus.ipk
Size: 74028
SHA256sum: 5b8e8268fc21eaff3c8386f94ab58ac5eca8a7a9ead3b3488fe8c07d211ceb25
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mips64_octeonplus.ipk
Size: 45643
SHA256sum: a7cb72f73d5564896431dd5c8cab3b76bdcce4fb5857f4016165192e7f03e08c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mips64_octeonplus.ipk
Size: 52968
SHA256sum: 7f1889bd0c6ed530449c3e5d2785a8a78ab8a4947184f0a7a29f9da24b4b53e5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mips64_octeonplus.ipk
Size: 15864
SHA256sum: 8879a2660f0f7fff93b93b00bc399213c3a7f8dde9c72049541d21f952edb5f0
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batmand_1440-r1_mips64_octeonplus.ipk
Size: 43908
SHA256sum: 41d6e36a505bbd84ecb278eddbc6407a70b3688bfbee1f72a9b653885b197804
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 1218560
Filename: bird2_2.15.1-r1_mips64_octeonplus.ipk
Size: 412739
SHA256sum: 5740e97bcfa8925560a79bcc2a64b82d8a0d7bcc427550314229c5f41dd0d138
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_mips64_octeonplus.ipk
Size: 11070
SHA256sum: e4031322ca806866031a3aa895d2b00440bd4cc2898db98c677c6ef39a5987c8
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_mips64_octeonplus.ipk
Size: 9651
SHA256sum: cee157c3f0de565c2418205d4b03d092e04cc1c7d2d01c7f682ac87b36f9e5c2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024051906-r1_mips64_octeonplus.ipk
Size: 4687
SHA256sum: 600baf264797115c434c8cb3ccbc15aa4685afa2e1d2808f8315e81785a87427
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-json_r2024051906-r1_mips64_octeonplus.ipk
Size: 8409
SHA256sum: 6b3fb539a6a21f0506b47198760c0fedb6d4bee7b56005728d2bbe2c5921b262
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-sms_r2024051906-r1_mips64_octeonplus.ipk
Size: 6211
SHA256sum: 93b0ad9a92efee31b6b038820a465140ca345d3efacbc28b19d34e075caa4c65
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-table_r2024051906-r1_mips64_octeonplus.ipk
Size: 10191
SHA256sum: 3156fedf25fa0c6aa029480f4ae9af9c5a89a2b14f76f1cdf2c84cc4aa170955
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-topology_r2024051906-r1_mips64_octeonplus.ipk
Size: 5610
SHA256sum: cdbf82f849a8394b584f2dcab38ad70d0ddaf076a26be7413881616adf4384df
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-tun_r2024051906-r1_mips64_octeonplus.ipk
Size: 25684
SHA256sum: 6bad877854ec3bbc3fceb1c0ca8e6ebc060f94d57c98dfbedfa1a0f26f90d1e0
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-uci-config_r2024051906-r1_mips64_octeonplus.ipk
Size: 8934
SHA256sum: 41084d5c26a67f30398659af5a594823dfe85ab2bb0edc338db6e0473669c77f
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 440320
Filename: bmx7_r2024051906-r1_mips64_octeonplus.ipk
Size: 165026
SHA256sum: 3427e2e21e57d7e3bc055b4f34f0538d920e1313b7f3b5a981438e4eb7bd1be8
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 839680
Filename: cjdns-tests_21.1-r6_mips64_octeonplus.ipk
Size: 328091
SHA256sum: 576aeae0e9c7bb19f2d85e29fabdbd767d6ea57de898b12cce880416dabf540b
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 1003520
Filename: cjdns_21.1-r6_mips64_octeonplus.ipk
Size: 384303
SHA256sum: bbc294e306a682ae88ebe8a723e5babb6a2dae050f27583c01ff4ef553e55f8d
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 1419
SHA256sum: 7c8e26c341ccf7c3fa00da0eac5aceccfac84c3b3522482d2d484aaf45adcb76
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 962
SHA256sum: 0fe7c901a4bf6b87aed33ade97ac6fa12faf24bb7c0ec2a764cbcc19416775aa
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 942
SHA256sum: a7ef47d2d1bff28e2ec51c1695236d3432cbd8e6edf97c43f1cd50f5216240c0
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 108051
SHA256sum: 1d11f469e461f08b65b675f292af8d327da932428af6cf45c6aa913351ddd39f
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 119469
SHA256sum: a9c877c32fdd747ce9409f2f01a76ac31cf1e8150d937bb8dd007418dc63ccfa
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips64_octeonplus.ipk
Size: 6589
SHA256sum: 9e4336efdb491d64257128086d410460c57e52e7607d81ca6d51ee2a8d07fa00
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 57623
SHA256sum: dbcd5d22dce3314d2d524a9bbe2b7b41cec8b604e73dd1c282120075901aaf52
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mips64_octeonplus
Installed-Size: 491520
Filename: mcproxy_2017.08.24~93b5ace4-r9_mips64_octeonplus.ipk
Size: 137973
SHA256sum: 31cedfba3091277ba956a1746ab6013f44e5538214f0168609dedd6a74abcedd
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips64_octeonplus.ipk
Size: 8325
SHA256sum: c51819b246d3394326aab6a44de2dbf929485a972f4f0a14db0ac5917aa7fcd0
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips64_octeonplus.ipk
Size: 41373
SHA256sum: 3c18e20cc45e70747eef79feb6ec95a6f8efa21f0f3506157bebd9ab721150aa
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips64_octeonplus.ipk
Size: 50568
SHA256sum: 5623c614280221412a14b76b6dfbc02d519bccef54ee5a5a5d3533860f41b832
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 13057
SHA256sum: 9953a10e67d2c3d38946bfad60fd43d653f591d4f2aa72fd94f2bd3cb5d8c2af
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 2804
SHA256sum: 21535694853f12432724d47182ccb9a787257a74223f0965d35ab5e4fe920e09
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 12745
SHA256sum: 0ca63d05b601b9c08c3945ce9df0d580b160dc11698ffb142ba605f37300e3ad
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 4500
SHA256sum: 4babd46011f2b910222ce044f279abb951b96f2dc0492a32da3f220acd3415d4
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 3119
SHA256sum: 810d4422de4dd1034004166a8eb7b30edc2c84de77be1df7f15807ef210a8627
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 4953
SHA256sum: e175b5dfea7a74e4404b7f4747f2e9b0fb0c7a9740cda120a6a10c6f650d4859
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 3371
SHA256sum: 5853602f7ad802c343c37010a8cb704f39495bc50f16cca9443a21cf49ea04bc
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 31186
SHA256sum: dda61a60f0ce0bb55b929091835f061429672b20b15f5991ebdd0f7e94615928
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 21622
SHA256sum: c174e80da36df0ed0fc062523c0a4e445a73e3a1925044d4878dbddc707d7bbd
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 9533
SHA256sum: 9425a675ac65f41a0b997b37d4b4b1aad6a1d3eb2f8865a4d46ad4d1fb572303
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 11738
SHA256sum: 03f899c6c264d3bbd0652b93804109f403c637b5768ca4231a5147a343bd725c
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 13253
SHA256sum: bf86f7832697d4ed361315a8ffce1a1ec85c17516cb6fd852bacd783948f8b1b
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 9218
SHA256sum: a14c0f89f6d9461d53f53710975c4844b4f27a1d060f758efc73f7093ecd394c
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 3659
SHA256sum: 8750fceaafe7bfbb049037fa4c51e042abbcf76a2c6df1a2c0743aaabdb2e9df
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 256000
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 57586
SHA256sum: 47144e75d078f2c82f78e5846a9d1a6721ba8390cef94eeafef541e4abeb7a64
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 6989
SHA256sum: 8861bf1d60905f40852cc6814cc7fd605bab83657ad671b90be9f0e02ff1dbbd
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 10936
SHA256sum: 3d01e7253c54a5fd206f716710f675b7aaa0c759ea50ad16aeabf6e661846e4c
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 5210
SHA256sum: 625a61798a68498b8c7546abd214c0e583442cd429022b31ca1b6f2cfcd41e05
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 15135
SHA256sum: 33d54a8f8dbb258950b793ebe5884b868360b56459d69c5d07e9bd29ede86380
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 2460
SHA256sum: 6511b8711b5f6105e8e5325be3d31155bf2d6f0f32f6cb52628a200e9b647f31
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 1953
SHA256sum: 6c9498c8ba0b05d4f774b228f482614b8d4d6e3f7b6c27b54b80330d5cf94aa9
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 378880
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mips64_octeonplus.ipk
Size: 134161
SHA256sum: a8b6b10c6b0fb209449c722ccf90eba4f9fa2af4f850408208b054401b2bf3f4
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 168873
SHA256sum: 6c3df439ee22ec553bc21a5b2be7a299bdb119f5652e86dc2f317a35a9c96615
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 164419
SHA256sum: 9480148eb2dff86f9783a40cf5f74386660d96820ecb38fd3de402dd86ab35e1
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips64_octeonplus.ipk
Size: 2307
SHA256sum: 94d9fce7c58564598fd665b8c60e21abd151bcac060f11f904cfd6e6e58a9d8e
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 727040
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips64_octeonplus.ipk
Size: 244530
SHA256sum: 72a129b143dfb8d6ca427198c946f5c1a6deb8f8ad7134e377219d6bc4650825
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips64_octeonplus
Installed-Size: 696320
Filename: opennds_10.2.0-r1_mips64_octeonplus.ipk
Size: 160860
SHA256sum: c14fb58ebea86e2cff0a3c74cab5293415c801cb2a4f871d9e44b4eadaf86d50
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips64_octeonplus
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_mips64_octeonplus.ipk
Size: 88553
SHA256sum: 89c1502fff1792cf80b8b452347d0274c205bf2939820a75777d0d1c380f6474
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips64_octeonplus
Installed-Size: 215040
Filename: prince_0.4-r3_mips64_octeonplus.ipk
Size: 34976
SHA256sum: 0d01014493ab371640b6558f1654ded3b3e9c632c256040db3d317cd5f344bf8
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips64_octeonplus.ipk
Size: 12791
SHA256sum: 7ccd85f753b8239a14d2ebb6053b7350e37570db747955a88ace600d7dae44db
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 10762
SHA256sum: d69e1a00db9263690ae702c89e15beb5ad410f71ee6e6a87e6ddf29321f8ddf0
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.