Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips_mips32.ipk
Size: 23375
SHA256sum: a1e4eb8d17da59ebb73829d7fddbfb26c11c5d9edffb4b85b69717d0be482d65
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: alfred_2024.1-r1_mips_mips32.ipk
Size: 27588
SHA256sum: 6bfc841050629716c775a3987aadaf2ca434f7a10657f51678065dbb644c018b
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips_mips32.ipk
Size: 4639
SHA256sum: 76bea58daf28d8d8a7a0aca135d14af1caa28928dafd3e3a2b11bb8cfa50e30a
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mips_mips32.ipk
Size: 63783
SHA256sum: 804b47946be3e46018c57ffd5dfe7f43c537ad79c7fd71a49d10e1bfb0c25663
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mips_mips32.ipk
Size: 42441
SHA256sum: 26db87c7e18a11aec1e309361e66968e3b7c194b46ad109b25db97320ef167f1
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mips_mips32.ipk
Size: 49977
SHA256sum: 75eec11b5f82a94e2549ff2e2d4fd1c789ca00632bbb2b80bc09bfe6309b176c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mips_mips32.ipk
Size: 14485
SHA256sum: 08a1635565822a2f2377a944a949a3951ff884ac7bf33522c7615af8407203df
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mips_mips32.ipk
Size: 39875
SHA256sum: c809caeec7216937411fc356387635d7a8be409f05aad480abb59196297729f7
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_mips_mips32.ipk
Size: 397557
SHA256sum: 37acbdf0852889a4e95525b424438f805841722b82021b4d17d65d1b67073a18
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mips_mips32.ipk
Size: 10540
SHA256sum: be1c5ec0a1fc97187f5bb02723af6e9e47ff75b12a0dbfc539873404aee967b9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mips_mips32.ipk
Size: 9212
SHA256sum: 6967b7298b4e6c9531b8ede40595b269c778a7181f426248421407196db09fd4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024051906-r1_mips_mips32.ipk
Size: 4680
SHA256sum: 57c1aa280be49d383ecfe96f537936dcf2e6bfc84b3ff5c67996434c6790726f
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024051906-r1_mips_mips32.ipk
Size: 8629
SHA256sum: d832e9ce938060011d544af8a3baf3a31e581af7cf26ab0100d782fe9dc6cf90
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024051906-r1_mips_mips32.ipk
Size: 6138
SHA256sum: 740d64ce9a729ea9ed99d235b767d134c098e2806efec126e32cae092628f2a0
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024051906-r1_mips_mips32.ipk
Size: 10133
SHA256sum: f289648dc8b77735a516dd243157e99aace7c2094db29f4b739bbeb11ece62a2
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024051906-r1_mips_mips32.ipk
Size: 5661
SHA256sum: fb35467fbfdac1d4cc9f6b463eafe1b032e46b7ec8a3a44d93e7ee6e9a825c87
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024051906-r1_mips_mips32.ipk
Size: 25869
SHA256sum: 59ba5181a05d4bc949dc29e28fa2d1cd2fb929b840a1d9462f2a0f4ff46ca84a
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024051906-r1_mips_mips32.ipk
Size: 8817
SHA256sum: b6ba611d2d14b70ff367924784b38c1170cf0e8f365b34a647f535ba61f7aa9a
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 419840
Filename: bmx7_r2024051906-r1_mips_mips32.ipk
Size: 176517
SHA256sum: c9e22ab463309c4786ae2a1120e3f5818cf5e707ba0059b1f3355d4a995937e6
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mips_mips32.ipk
Size: 376517
SHA256sum: b61a7c65d59adec058a344d42ea0146b529892af041cd183395eca6385ab2155
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mips_mips32.ipk
Size: 455946
SHA256sum: 24ded9fe39b189372ec4323e0fb377974f906da418b3e0f8f41aaaeace83d51e
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 1422
SHA256sum: bb938307e90321abb16cdd4f5b584a3e5024b63620d608f50ddb3678509c63e5
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 951
SHA256sum: 81648ea8855b8f9045fd16a78c5b256871c6fdfcd9737ee62cce214e94ee7204
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 939
SHA256sum: 37318e6aeba092408a653f725f0bf8a5cdbb14732c6324ba54b00ed3f48c4662
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 95732
SHA256sum: 2d2e07d7aa0a105bb1c140013aa95ebe2a9215a14b26aedbc1641c8d1eb96244
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 106039
SHA256sum: 882ff0e854ac2aadcba53957c3f6a00801cf761677d2b5f7b741e83e400cdcd5
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips_mips32.ipk
Size: 6586
SHA256sum: 90333af73a11904833b52a0c4fdd57ab856348dfb78a3ab6b796f6846c322a02
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 57613
SHA256sum: 1ae1a3fb2cd518140cbb95741460673c115396775870ec7915edc8eff8b13eed
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mips_mips32
Installed-Size: 419840
Filename: mcproxy_2017.08.24~93b5ace4-r9_mips_mips32.ipk
Size: 122643
SHA256sum: 52ed39176626d92279f01aa46dda95179a5c0ac6d39687ed8abd8078bcdc719c
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_mips32.ipk
Size: 7562
SHA256sum: e1b495cb07986de5f27fb0aeeeae2259425137e140a815f8801de7ef5c8f32cd
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips_mips32.ipk
Size: 32019
SHA256sum: 35de3decc411c0f1d285281926d6db02da8975ae4dbcfccaf07a55665f7eb386
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips_mips32.ipk
Size: 46130
SHA256sum: 0155a66fd0f231b9ed235507a2a68e38271a4df53199b6a439eaff4ee97241ed
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 11816
SHA256sum: 20e57cf39a0264d5195f4f61ba99bf80945b1be58f95f28dbf45a2fb5e82e8be
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 2713
SHA256sum: 84ebe317571707b04c1e10d85b59435cbf8e97083369c68650cd517785349f00
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 12795
SHA256sum: ec5515b29d07ec79d25d8464d6c1b8964b9389524c578c8582ff624dfa94cf1f
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 4439
SHA256sum: c31d2fa78a644ed5d383a1534d8d7404b2f8b9477c668c79008d64e5f9da69be
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 3057
SHA256sum: 429d76cc243ebb89c08cf6a825458363fa3da8bb0f8b5a7cdd3f6cb315fac42b
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 4836
SHA256sum: 0e51bd3484c717e3e9bbbc0d71df5d2b4aa45275ececaefaeee12c1421b68b23
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 3230
SHA256sum: 0a2e0b7702c3d964a019e7d78c601fd91793e47d987e42b5c3047dcc96e2230b
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 31777
SHA256sum: 6e44ac39c85b6fc4de0c7bdc838859d0bcf3cf544ac6508f9100670e5ba4c2c3
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 23714
SHA256sum: 806c8aa966032005f596051497df4e846da12d5f0203fe361dcf485b1dc22926
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 9489
SHA256sum: 95b051ade8d8b10fb8322dafc0c43397a71008072f6952bd6ad04ec08a10d497
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 11983
SHA256sum: 1c115301a20c43f19ed5a41d5ba14d4c33f4661eca99b5e725739f49c272313e
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 13798
SHA256sum: 2058e33c8fd160f45a18936ddc5f648dec8e6f71fa7aab19be8ea6c51216c5a4
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 9207
SHA256sum: ad3568c9b7a0ba598c9180d31a79d88dd66642c2ae0e1352c20ea32e40b0060a
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 3606
SHA256sum: 197470e0bc7383b218ee2e55930b34ae6dd9c0db5b8e32d851a43d868171e355
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 63014
SHA256sum: e6df9d8d0416f4170d3ce5539ac5d141234d3bed6cf1290f1ae9ded0ce39997c
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 6966
SHA256sum: 299780069194e220d224d3b31886ce8e8c131969dea44fd1135f9b0ae8073d71
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 11004
SHA256sum: d7f4818a3b021cac8e27b8fe555b14a65ee7be8c6a227fa57c11767e54fa3e00
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 5176
SHA256sum: 6edf2e6f0b9352fe67098d600e285b1714b6aedeb810caed202d0ad8bf28dfe4
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 15556
SHA256sum: ed7d55ff0b99d2abfbede5b9df5193a64a863408a5dc33ad21f3d2ec507e819f
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 2397
SHA256sum: 9e08079852a81dcc75c81ea9fc8aacc301f64b584c53cb88dd36b1b98439da5a
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 1945
SHA256sum: 0bd2c4bf52437e96fd14a93156e1e377c8e91425731e986e61df0382dcaaec69
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 368640
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mips_mips32.ipk
Size: 139294
SHA256sum: a295fd7d669c6bb0c16061634b8f0d872e81b2105e27f09840f43d076b1413c7
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 159698
SHA256sum: d677e53b85e3c8fa67422d31c0f075a197a430ab6010704601f350a2c91dd3ef
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 156080
SHA256sum: 5be07eb6f2f5eb03177a271a0ac9f8ef97ce32c23a183048afe245ca16428751
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2302
SHA256sum: eb7472e69b1d43f60b56d0e183ea074d4304993143406cd6b5f6e93e7f6cf70c
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_mips32.ipk
Size: 232599
SHA256sum: e1207bd792f818f4f52770bb0b21109f6726483614875ee45baed53c54813154
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips_mips32
Installed-Size: 624640
Filename: opennds_10.2.0-r1_mips_mips32.ipk
Size: 156242
SHA256sum: 068f76d1c19083a99cec3593a5e2ec168b187764261cfb182521cefd48699e05
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mips_mips32.ipk
Size: 79160
SHA256sum: d7fcf7ca87d77eae74b85955ba58ea7b4804bd40db0078b173aacd1eade77a5f
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mips_mips32.ipk
Size: 33814
SHA256sum: 13c69d72affd4eab9bd26a53151c5e925e533f60ccaa4bc87640263b17dd1752
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips_mips32.ipk
Size: 11144
SHA256sum: 92c1e4551779eb1293209967ee703413a823d9d88fc444438fd08f6ad3c1202c
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 9482
SHA256sum: e2c19c6c96179c98ec1088e117084d426d42d336009054f61eb97c57da8fe387
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.