Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: powerpc_464fp Installed-Size: 81920 Filename: ahcpd_0.53-r3_powerpc_464fp.ipk Size: 26306 SHA256sum: 162395f37f65c818f4996db704a75ff2e34da68d1f48bc01da4a2b25f4492356 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: powerpc_464fp Installed-Size: 143360 Filename: alfred_2024.1-r1_powerpc_464fp.ipk Size: 30258 SHA256sum: 522a7ce2c5e7d9f49541c7f8af77ffb01d55c23b2ca2ee3a5d0a939f8b81709a Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: babel-pinger_0.1-r1_powerpc_464fp.ipk Size: 5129 SHA256sum: 6d9410189bb6054e657dd38d79e24b60bfc358f33abb92efb7550f11455c2ce3 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r1 Depends: libc, libubus20231128, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: powerpc_464fp Installed-Size: 215040 Filename: babeld_1.13.1-r1_powerpc_464fp.ipk Size: 74003 SHA256sum: 11eac5cb17917700fb38375b48c3f6eec8302e45a8fdf612ae5966f4e5c031c4 Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: powerpc_464fp Installed-Size: 143360 Filename: batctl-default_2024.1-r1_powerpc_464fp.ipk Size: 48798 SHA256sum: c1617aed60c49c32994b7fe5d251eca7f41439a07e5e459326800d5737842141 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: powerpc_464fp Installed-Size: 204800 Filename: batctl-full_2024.1-r1_powerpc_464fp.ipk Size: 56933 SHA256sum: 45b5f4d738da03f39104c5c2cca879e37d2b3314f5a08be1a954e4929c4272f5 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: batctl-tiny_2024.1-r1_powerpc_464fp.ipk Size: 17615 SHA256sum: 30a8d79c82f2cd935f6d21b5afae552dd9b819fabe8b53d87d5354ebeb1bc3f5 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: powerpc_464fp Installed-Size: 143360 Filename: batmand_1440-r1_powerpc_464fp.ipk Size: 48357 SHA256sum: 94f23ad905464c6607339f13de10b8bd4186414970abbe380292b07dfe8f03f8 Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: powerpc_464fp Installed-Size: 1269760 Filename: bird2_2.15.1-r1_powerpc_464fp.ipk Size: 451678 SHA256sum: 7ce53171f1623cc1ec4b5da4f5715b0a51936397fc220225bbd41d74395f1f85 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: bird2c_2.15.1-r1_powerpc_464fp.ipk Size: 11548 SHA256sum: 70473594d01b18926ac82ed4e990e10a159cd1dc7cbd37358092cdd3607e517c Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: bird2cl_2.15.1-r1_powerpc_464fp.ipk Size: 9873 SHA256sum: efcd2e7ed7a875ff873b8aac0500c28b564957f80cc3e741188a5a45cfeea63f Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024051906-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 71680 Filename: bmx7-iwinfo_r2024051906-r1_powerpc_464fp.ipk Size: 5365 SHA256sum: 8251f80f5c59bb618f7727af5b8922221e58ea04e4226dccae829f352adfede2 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024051906-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 71680 Filename: bmx7-json_r2024051906-r1_powerpc_464fp.ipk Size: 9877 SHA256sum: 88b7977f95c7581820cf230cd14af70afb9ab4983ab3af60a6b264044d6c05ba Description: json plugin based on json-c Package: bmx7-sms Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 71680 Filename: bmx7-sms_r2024051906-r1_powerpc_464fp.ipk Size: 7215 SHA256sum: 073f14d449a7907184456d74a951030d120ae6fef912e9ad433f287f667cc04e Description: sms plugin Package: bmx7-table Version: r2024051906-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 71680 Filename: bmx7-table_r2024051906-r1_powerpc_464fp.ipk Size: 11825 SHA256sum: 54369effd530ecdd3637addb5d0557f1a078e9efb3b01fc908dcefcde9194aed Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 71680 Filename: bmx7-topology_r2024051906-r1_powerpc_464fp.ipk Size: 6635 SHA256sum: 4d7ee0ee38732bc3e4db97b926b41deed0d1b172aa21c8e4129f2b30b3585161 Description: topology plugin Package: bmx7-tun Version: r2024051906-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 143360 Filename: bmx7-tun_r2024051906-r1_powerpc_464fp.ipk Size: 28462 SHA256sum: d145b1add45930d51a77ddb0484a4d1ce3af0e077b200a62dd615074e4021fb8 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024051906-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 81920 Filename: bmx7-uci-config_r2024051906-r1_powerpc_464fp.ipk Size: 9966 SHA256sum: 1eee86d890079a31a0dd8135585e7bd65506d064c23002d897dc862d9babfef7 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024051906-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: powerpc_464fp Installed-Size: 481280 Filename: bmx7_r2024051906-r1_powerpc_464fp.ipk Size: 187712 SHA256sum: 0f77ee352170b53fee2fba6f9a86743b6a07ecf69887db2fe649f33f798db3e9 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: powerpc_464fp Installed-Size: 962560 Filename: cjdns-tests_21.1-r6_powerpc_464fp.ipk Size: 377857 SHA256sum: 078a7af410cc330a0719bb243c3138a0aaa6c1f72a35a3d04a0cf7413fbcd7bb Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: powerpc_464fp Installed-Size: 1126400 Filename: cjdns_21.1-r6_powerpc_464fp.ipk Size: 448047 SHA256sum: f7f8329cddbb9a250eaf6e732ca373cf2c923df3e2e0785690186d121f0d64af Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: powerpc_464fp Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_powerpc_464fp.ipk Size: 1422 SHA256sum: a71485f85fb3c2f5bd7c316707fe24ac8a6e184c773e77ee0620665474df14ad Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: powerpc_464fp Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_powerpc_464fp.ipk Size: 957 SHA256sum: ebefaf54ff2a56c89ddf8afc51d9111889ee958032a02fde6aefd1f4bc54b38f Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: powerpc_464fp Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_powerpc_464fp.ipk Size: 943 SHA256sum: 2a80e2debe41f34e2e23e676b8e392d45569fa248e93b17b7247953a29c4caf3 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: powerpc_464fp Installed-Size: 296960 Filename: hnetd-nossl_2018.12.21~c4376661-r1_powerpc_464fp.ipk Size: 111361 SHA256sum: 1a8f829610007aeeceb8529e5f2fa38ace315446c3a808f388f85373c87808fe Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: powerpc_464fp Installed-Size: 368640 Filename: hnetd-openssl_2018.12.21~c4376661-r1_powerpc_464fp.ipk Size: 123337 SHA256sum: b7da4350d5f59beba61e7430ab475f97303e7df95a510cc86f96e5df803f1291 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: powerpc_464fp Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_powerpc_464fp.ipk Size: 6583 SHA256sum: 5d3d94db53bf42a25fdbdb49a0c5630e5a76aec50b27a24ce2eb46934c807f92 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: powerpc_464fp Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_powerpc_464fp.ipk Size: 57616 SHA256sum: f432478c85b6da64e9ab0b69a89d9c0f3a4b01d702081a6d4d29d7f07cdc92ca Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7782 SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d Description: OLSR2 configuration and status module Package: mcproxy Version: 2017.08.24~93b5ace4-r9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net URL: https://mcproxy.realmv6.org Architecture: powerpc_464fp Installed-Size: 481280 Filename: mcproxy_2017.08.24~93b5ace4-r9_powerpc_464fp.ipk Size: 138261 SHA256sum: 1876b9173b2bffe6e287e4457b73612023d122bd1cdd94604a8e8bdfd6abeb0c Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 4.0.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 112640 Filename: mesh11sd_4.0.1-r1_all.ipk Size: 23609 SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: powerpc_464fp Installed-Size: 71680 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_powerpc_464fp.ipk Size: 8631 SHA256sum: 007e62d3867b4dd4f7f96b486a689270969a171c299babe40890166f6421b7e5 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2853 SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: powerpc_464fp Installed-Size: 143360 Filename: ndppd_0.2.5-r2_powerpc_464fp.ipk Size: 35419 SHA256sum: ff3abc666052540bc98e636fd9c84a98b510cdc3907b93e51b04b04981bb6362 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: powerpc_464fp Installed-Size: 235520 Filename: nodogsplash_5.0.2-r1_powerpc_464fp.ipk Size: 51797 SHA256sum: 6d570fd75b7a6818961de82fd8bef2f58b029f83a166aa99aa55451efc59d0c0 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: powerpc_464fp Installed-Size: 81920 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_powerpc_464fp.ipk Size: 13270 SHA256sum: 88f6c400ec7e00a9b16b827e1278c2de388cdde0788d70f92780c8c4342f22f7 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 3145 SHA256sum: 637f240135ac20528abb5005cc77309036c7fe18da7c4e4bc919d879957204f2 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 14935 SHA256sum: 54f9f0e44608be33b0da44922c30e92ccd216f5fe3e62aa14e1e782307de6cfe Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 5280 SHA256sum: f9f248cea217777ec20ec5b6b4df41b107b5b8369bbf874932df394135a96ce4 Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 3674 SHA256sum: b23098ff51bd8064ae58e0c4c57de115a6fd659da81e83f70eb29bd249428096 Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 5686 SHA256sum: 9bbed5041fc5272f74e82a85d8498b4a7919759ecd9366dd1b4ba370e7a46a82 Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 3886 SHA256sum: c897f351a9009045574aaeedb26e67fbb4e2a48ca515fe65074d8149798e85cc Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 143360 Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 33957 SHA256sum: 8b18f60da04e8ad685975507b1ce880e626f0cc0c845aed93491eda092a206cd Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 143360 Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 26573 SHA256sum: b5cc24e8ccc714464e9565445216a744c6e337bd97e3d8ecec02d06f89720eea Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 11435 SHA256sum: 91419cfb81d4f7f20a82c462451a8b29370fc283af32536b8163093b633e804e Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 13671 SHA256sum: cdab4399eb918d9244172856a1aa85793a6a20dfae567f459790c7d28360ed50 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 15804 SHA256sum: f72289945d8609572f2db3274e7c82169146bdd466f13ffdba53acf526c21655 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 11052 SHA256sum: 3a9eb161fad52aaea92eb9c51e62fbded6e0fa2a201d002b623e4c229881d102 Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 4157 SHA256sum: e9027eaac2a31d5f2ad583d7726b8ad216178788e0bd713773c83241e19ee1e2 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 337920 Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 69181 SHA256sum: dc59507e410d960ad70520227e3fcbc8aecf743d7fbdc1040c1f6e337661ffc2 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 8213 SHA256sum: 176dac830e59052982818bdae3c62a4bcecade2dbdb41e717f6b444c4eeaeee3 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 11885 SHA256sum: 5ef160157cacd838f80ee20b8ce3d55a41857b9972aee90b450761fd8d713c8e Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 6259 SHA256sum: 2a282907fdea8a69cd78c230845b93a4dbce1d3e18ecba9f2b1acc72fd6d7989 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 17914 SHA256sum: 96fe1ca4c6a2cf72e6aaea66eb748aef3195b60c54f0a3284220db8d84f33856 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 71680 Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 2802 SHA256sum: 14e54b99355645ff268bee06851def92cbe2175ea42830847bbc3f2efd5e20a8 Description: Watchdog plugin Package: olsrd-utils Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 10240 Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 1944 SHA256sum: 1ee2a91bb603d2bea008f122cc8008ae33027e4a0060def7116dbf4feecd8fa6 Description: Utils for OLSRD Package: olsrd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 430080 Filename: olsrd_2023.06.12~a9b3f1ac-r1_powerpc_464fp.ipk Size: 152675 SHA256sum: 8f76d8eb15174848cbed10b7ded768e1050cf4b24b43a41813c33f5b03f79dcd Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 563200 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_powerpc_464fp.ipk Size: 211836 SHA256sum: a7046a40a67cfb7ac9cc6446edc7bda2ea1ea9587ed2a209d2b2e7b19a1fd11b Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 552960 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_powerpc_464fp.ipk Size: 206291 SHA256sum: a637e7bb8743a3af4119441bc10a50ccc136d8bf915005feaaf69bca1647239a Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_powerpc_464fp.ipk Size: 2304 SHA256sum: 8b30897090c7594791691869d68670ea2e697301166763de0f1d15e00b3141d8 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: powerpc_464fp Installed-Size: 829440 Filename: oonf-olsrd2_2022.08.25~1cec9b21_powerpc_464fp.ipk Size: 306115 SHA256sum: 28ce0c89ec64cad4d83ea10d78d95990b39b40e4199d58262608124ce4484d24 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.2.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: powerpc_464fp Installed-Size: 696320 Filename: opennds_10.2.0-r1_powerpc_464fp.ipk Size: 164110 SHA256sum: 8c943718b7bca3ef1793f1971320d65fd621f0f44921cd2fd48591b7e3b94614 Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: powerpc_464fp Installed-Size: 286720 Filename: pimbd_2018.06.19~dbf4e591-r4_powerpc_464fp.ipk Size: 89591 SHA256sum: 5af30bd2f372b778ef1c9fd8e0b8c96ab1b7cfb52a34c0ee441f1ce694081511 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: powerpc_464fp Installed-Size: 204800 Filename: prince_0.4-r3_powerpc_464fp.ipk Size: 44893 SHA256sum: b2190e59d7657206f7678c9566c26446bdca629d09fd4c03203f25f8b91412b8 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: powerpc_464fp Installed-Size: 81920 Filename: vis_2013.04.07~7710cce4-r9_powerpc_464fp.ipk Size: 13223 SHA256sum: 6f585430c7f4ed04371be3845e182eb96bd5555a61b8dddfd96536b642fcdc36 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: powerpc_464fp Installed-Size: 71680 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_powerpc_464fp.ipk Size: 10904 SHA256sum: bb79f6fd8eac1acc1a3684f8794d43a0fe5d3f2641e3da47258a654e705c72b3 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.