Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_fa526
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_fa526.ipk
Size: 22818
SHA256sum: 66d5e726729c310fb6033dc8b91391bb008822e06f9c2b76d9975b44b6d40f76
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 71680
Filename: alfred_2024.1-r1_arm_fa526.ipk
Size: 26081
SHA256sum: 8f14b23a8c10612fb6dfa7cfd18fd06c915a58b9c02ec1fa50787ae360e61142
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_fa526.ipk
Size: 4624
SHA256sum: f7617027f553181f8bc7d0651ade2a8ddcdd41257dedd0b470b1379efe47b360
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 133120
Filename: babeld_1.13.1-r1_arm_fa526.ipk
Size: 63354
SHA256sum: 508ab83eb0dbe7ee82366480415ef2b5c0dbac7ad200c5a60f4a8da8226feb97
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batctl-default_2024.1-r1_arm_fa526.ipk
Size: 43611
SHA256sum: 6c5d7e6f3dc29f08bf0f1a8b792a91b9c534dd24c296f3521de5206e27617bee
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 112640
Filename: batctl-full_2024.1-r1_arm_fa526.ipk
Size: 50703
SHA256sum: 49927c27c995977eaa71049737905feb892c3e70f14f027390d3425909bd688e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: batctl-tiny_2024.1-r1_arm_fa526.ipk
Size: 14716
SHA256sum: 43cce73792dd37799319d57d2339cccc73cd46fc773b6917ac317f0ae81cec8f
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batmand_1440-r1_arm_fa526.ipk
Size: 43328
SHA256sum: 7485977a9111a9dec5c559afda229b36be8ce7a8a1be02cbcaf73bb396c4d8b1
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_fa526.ipk
Size: 385286
SHA256sum: 8e0bd32ec3a2b03c46ca6a5a1ff7d789d57ae08365589e02f7e0cae8e3fcba83
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_fa526.ipk
Size: 10458
SHA256sum: 2eea2d57f94b3dd70bb1e318bbbbf1ca7420f54fae60ef5f945d82f59aab69bd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_fa526.ipk
Size: 9056
SHA256sum: 7b572856cfb10de5d9a4642e83465493dabaad2dc109ed944ac6d70d49c1566e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024051906-r1_arm_fa526.ipk
Size: 4838
SHA256sum: f5ce5960ec15dba1d7795ef9aa9095bbc676947866237e8cf7acce49c101a7ce
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-json_r2024051906-r1_arm_fa526.ipk
Size: 8479
SHA256sum: da926ad067b0a8e213acc4170f3b43257c002fbbf8aa5eff1450564727c838d5
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-sms_r2024051906-r1_arm_fa526.ipk
Size: 6108
SHA256sum: 0703ce304b463721ba09c4b3b6c0e7f9b09222938dae6e0d76f28bb3e0262530
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-table_r2024051906-r1_arm_fa526.ipk
Size: 10286
SHA256sum: 41ea4af7fd9c1b5fe5ebcafce2236987cca4f1c9d190326783596aa374f93ee9
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-topology_r2024051906-r1_arm_fa526.ipk
Size: 5782
SHA256sum: ea46d2b119090a8df290c88d739c73003fefb94e192e61c1b6c0cb56d0cecc59
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 61440
Filename: bmx7-tun_r2024051906-r1_arm_fa526.ipk
Size: 26533
SHA256sum: b86f0792d5392c8322459fbd84bb972bee0f04cc70188ef5bc9084483992d8f6
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-uci-config_r2024051906-r1_arm_fa526.ipk
Size: 8882
SHA256sum: 4a87915817afa551ff5cd8b549db41e9e585b274ad12bc761dee7c5e48c73580
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 348160
Filename: bmx7_r2024051906-r1_arm_fa526.ipk
Size: 173139
SHA256sum: bb45f9085f1482134f3f5d9903a0766fb4d502a15a3ae3aaf281f28064253e22
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_fa526.ipk
Size: 346030
SHA256sum: 7f6809798f7cfa2e57d0a6a071c7475a178c28f5dc47361297fb8f4c4c5832a0
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_fa526.ipk
Size: 399966
SHA256sum: d3eb42ac74b6a5247a2e5e5feaccef1e86ed5d87c2af5542b8d199bde94e7aca
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 1416
SHA256sum: 2f912a1cacd2d3843ae2ee3a74063d55c1740b1736ab2bc4f7c03eb9b68eac9b
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 952
SHA256sum: 4d27fd971d4706e913a9af689e0d993dc774276dfc80c2062c52555c978c0184
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 944
SHA256sum: 5ca385c76e64e15efc4cdbabc91d4f497c881fcdd0609cd4d4887a9eafeea6dd
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 94717
SHA256sum: a4e28a75db41c142477b9f25205357561e56a77ca72e49a3e2fb6be985f1a57b
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 104621
SHA256sum: b0481f156a104c8c77632308cddf6d94c0987590440db4ee77929241ee86d548
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_fa526.ipk
Size: 6583
SHA256sum: f6c8f411492620c2cf54d29621ac7ce717471aef36df08cbe37218aad5b0170f
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_fa526
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 57615
SHA256sum: 5732e99c2b3af9b2483e6f577f4f6338f20dcfe90600722d4cdc8cbb015a7ade
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: arm_fa526
Installed-Size: 327680
Filename: mcproxy_2017.08.24~93b5ace4-r9_arm_fa526.ipk
Size: 123951
SHA256sum: 7d68b72f6d5675e178e0b2360ce3de6d8acde13858f79b409d1f8a8bd4dcc437
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_fa526.ipk
Size: 7193
SHA256sum: 3b7893169f6b13d31990f4fa0ed12fd410236f85b244362a886c36d4db9a81e0
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_fa526
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_fa526.ipk
Size: 32435
SHA256sum: 22c8dcfb5bb6e9cf017ca64add19c0ef7fa53c10abbf322b1f572a2a007a0da6
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_fa526
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_fa526.ipk
Size: 47607
SHA256sum: 6339fe76e4152e4ae31bee3c760d2dbeb348ca363b27bf75ac4a5bce60b02d9d
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 11153
SHA256sum: 1220ba04c7317175a5fe7c2bcc8b0ce564b689f683a61a726005dc6c6ed46834
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 2727
SHA256sum: febef83c9ed364a139eb04e6b655767ec07c0c6e2244cbdb601471fa03b02dec
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 12911
SHA256sum: 80d1fc756daa90f9f3a0837e055d4425849c88a931a1f95777b30c24a190c8b6
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 4580
SHA256sum: 8a911eb7482171a9a03b2f832efbb1c14038aaafcb2afdde2f8359b6db0762ab
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 3072
SHA256sum: 4bdf40a9c01a3f7df8888ee7dbf48b68de1b3dc878316c4027714173871355e9
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 4736
SHA256sum: d9dbbe24981d6a3da4425dfa4b23516e5a76bebcc0f5bda5fdf008d9c1fbae0b
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 3296
SHA256sum: 0dc63e4f61dcc4acbc36ab2191b9a5fff98773febd15c63c65aa6d3bf8fd8bce
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 33564
SHA256sum: 691b7c9864cc43d053e80489a41760b09a0f8f8cca1817779997466be49f7de6
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 25353
SHA256sum: 81309e2270ad2d08b83dc85b8d05529299d7f732da5a76e7e0ae1a68bf900943
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 9769
SHA256sum: 06bd27975be2c9db06e7359b7b5f96c4657398dbf12343ab2770075fcd3fe64b
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 11737
SHA256sum: 3b17e436f7694ae2ca5e77a4dd6087610d0f51ea5d16022fc44018cd167fbe68
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 14510
SHA256sum: fd3c3aa0fa634a2ddd0dcc1cb29b8e2deb81e5700b8adc79bf59bd9cd69a3484
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 9007
SHA256sum: 95c05caa7dcf187194c01aeaeb83d19f1c22ffccf771caafa69bd2132b516b29
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 3657
SHA256sum: 3e574619135448892080823cb8a4a9dc42a6c6f4857a9af777aec865398c0730
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 184320
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 62329
SHA256sum: 6fa4271ae9396b843e44e443571c9b593a739433d20f6d313c9960cfdf684e8e
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 6807
SHA256sum: 6e35e54dc110289364ad81efead276c7f9a810ae59cf35ba5d9a87c3e1480010
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 11100
SHA256sum: 1c16a0f024cca86135e9f9242c41b226c871efeb679fe34a24234bcedf3098d2
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 5081
SHA256sum: 78241445b8a4995199ba7ae1860e4ba42c5ccd6499136e145dff7773ab782964
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 16456
SHA256sum: 3935eb3a14d682d42d131254668097cf09cf8be41995750a6330c133c5b9df77
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 2355
SHA256sum: 25cdc9789e3b1cc2be29d39929b6cebd3fff406ba485125145415b1eb783ff6f
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 1946
SHA256sum: 45e0cd97680407d6cedc0cb3cc6b9de814022a9ddfc1010aa2fe4744a9776a86
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 327680
Filename: olsrd_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 141849
SHA256sum: ece7bacceeb8426bde09aafee41b8d64c69dc94e205872954e9e563188b33dba
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 162201
SHA256sum: 7b159ba280be867b205c9a8bb27e70bfc7549516939816772bc686d3b3662ea8
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 158017
SHA256sum: ad4f409773eea68ec7b4e1f6afec0c93231c6650aefd74249b511fb0a20756e1
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_fa526.ipk
Size: 2302
SHA256sum: 16aa889f704093677e97cc53b938ea1511a88983e6106917d8a96afcf92f876e
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_fa526.ipk
Size: 234741
SHA256sum: 7ce3a4c3ee53acc1842001afc6942be9b5e7c0d326c226367ef4841a7123ec1c
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_fa526
Installed-Size: 552960
Filename: opennds_10.2.0-r1_arm_fa526.ipk
Size: 160299
SHA256sum: 6412633ee1055d98530729367e9d2d4fabf1ad0a75763ec6011ef866228c5982
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_fa526
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_fa526.ipk
Size: 83742
SHA256sum: bc4e38bdd679ba3f26947f940144e8d8b149ac37c03bf293514f8c3ccd57dd2b
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_fa526
Installed-Size: 81920
Filename: prince_0.4-r3_arm_fa526.ipk
Size: 27991
SHA256sum: 107cd2723870406ded164f44a3d3c4061a042e7ad16b39c7e04812d2989620ab
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_fa526.ipk
Size: 11137
SHA256sum: 3b8501fe765f1d17bdc8612ecd48eda4bf017d7fcbf251da814e57964142b63d
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 9033
SHA256sum: be1bc3554e071a894b47c91f625bc4f1c967f96c3ac18f0b45027903ed0f1531
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.