Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: x86_64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_x86_64.ipk
Size: 23304
SHA256sum: f8d52d8847094f6d65bae09e161763dae98fcd83610529013a3c1e7fd94adef3
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 81920
Filename: alfred_2024.1-r1_x86_64.ipk
Size: 27219
SHA256sum: 88a653e3a24e65382bd37cd1c4d630139e5bce486b5352bc9fe928cceed44557
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_x86_64.ipk
Size: 4592
SHA256sum: 99bff14e5688c2ccfaf5ca88e24747832030c37dd3c2dff5606e7d35e50c7995
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 143360
Filename: babeld_1.13.1-r1_x86_64.ipk
Size: 68869
SHA256sum: 5c8582c194c85223bb04e29c8c32e6193cfcc90cf7984b949da8d328b5acde69
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 122880
Filename: batctl-default_2024.1-r1_x86_64.ipk
Size: 47615
SHA256sum: 62407704fc18de18c2871da8ed32945f4a1baa533dd687147c114b32c5c2d247
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 133120
Filename: batctl-full_2024.1-r1_x86_64.ipk
Size: 54915
SHA256sum: 8f884e44195d1c89e2462e481a9a7f2f05c6467979e20f0ffbf70cb4517700b8
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 51200
Filename: batctl-tiny_2024.1-r1_x86_64.ipk
Size: 16668
SHA256sum: fd99c302d085e237811ca6efc17237792f6da31a95ffe9bd466a968264f6d58b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 112640
Filename: batmand_1440-r1_x86_64.ipk
Size: 44800
SHA256sum: f08290638fb7330d351e30ef1f599c4c600c0abc459422d986564ebc6d47bfe5
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 1024000
Filename: bird2_2.15.1-r1_x86_64.ipk
Size: 395884
SHA256sum: ea5354650c12bee425d29539dcb9f5f08d5d1fe312a597f4a7409ae783785d02
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 40960
Filename: bird2c_2.15.1-r1_x86_64.ipk
Size: 10621
SHA256sum: 7363d29a0921e89129ddf893f126097b1dcadee74e82672053ad620b4a4090ab
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_x86_64.ipk
Size: 9239
SHA256sum: 43ba866294ee0c421e39bf9f0b941f54cd8e974d3aa2292e81bbf4babc2c1d7c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024051906-r1_x86_64.ipk
Size: 4780
SHA256sum: 20aa421cbdc93192b67766f6a938c0062a3f0b39008bc8750a7823ab6f2ee552
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-json_r2024051906-r1_x86_64.ipk
Size: 8507
SHA256sum: 90b8e9ff35cabb8962d5b3e2105c29c541118d4a2395fb12ff8f6affb5ecb26f
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-sms_r2024051906-r1_x86_64.ipk
Size: 6028
SHA256sum: 96c52f9ff7bb608a4a9a97b738c2a11166485861da9959e48dabf7e4afc9e87c
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-table_r2024051906-r1_x86_64.ipk
Size: 10201
SHA256sum: e92c4430e13997ed832028a4facff38ac9830650e8b7af605ef82fac50cacdc7
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-topology_r2024051906-r1_x86_64.ipk
Size: 5524
SHA256sum: 7536ce4e2c8bd2f417e17ab6140c8109089a8b8b8e40e39e8326278f5aae8790
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 71680
Filename: bmx7-tun_r2024051906-r1_x86_64.ipk
Size: 26259
SHA256sum: e79432c77b6b4a848d820fe134ca977a67c467b01214f7fcb2e086410e9aba81
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 40960
Filename: bmx7-uci-config_r2024051906-r1_x86_64.ipk
Size: 9284
SHA256sum: 4a9852a76bb270ab41ee29fc3eca3d2b0b9428af962178db0da7f92d7fbc91e2
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 358400
Filename: bmx7_r2024051906-r1_x86_64.ipk
Size: 169843
SHA256sum: 4bc04561dbddadc816022b02f6f572412e58b619a80e59b9a13e4557226896e1
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 706560
Filename: cjdns-tests_21.1-r6_x86_64.ipk
Size: 330133
SHA256sum: fd92354cfe539cfd2eb08783df040921cf7ba7151045692d856a694b492675cc
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 849920
Filename: cjdns_21.1-r6_x86_64.ipk
Size: 384352
SHA256sum: e82ce4bf66087e0e17fa271c065fcb6661d1598f8a4bec076476e6a4051f4dfa
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_x86_64.ipk
Size: 1417
SHA256sum: 6737bca715e94c9964aeaa042c03df503575a05f486ed09c2526e909ee3fbd1a
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_x86_64.ipk
Size: 950
SHA256sum: 2f1f4e7fe39669de93eb498e01bb8144e0c191ff239175a7d789060361026a26
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_x86_64.ipk
Size: 936
SHA256sum: fe9316ab719b3d4d5a2e9ebcf3e8594505882caefeb5dfa4cfcf72191d020953
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 103639
SHA256sum: 8ee61232a7f9079c7a33d03e83a90b097662d45b5e0c9ac30947a8f247b28e67
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 256000
Filename: hnetd-openssl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 114568
SHA256sum: 670c733f2f0256456ce58a97478dfc8aaa18b88d88295225da53986734d8a9e1
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_x86_64.ipk
Size: 6584
SHA256sum: d75bb99c6152bf62244386df208ffd8cbe99dbbf1f7337b5c70c2b52b9e4cc73
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: x86_64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_x86_64.ipk
Size: 57614
SHA256sum: 3f65886031b71c48970f7e656cea93e072ab48cae0c51658dfaabfd5c652279d
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: x86_64
Installed-Size: 358400
Filename: mcproxy_2017.08.24~93b5ace4-r9_x86_64.ipk
Size: 131460
SHA256sum: 3f3c8c6557b86f67b7c7d42ff97ef05c4efb0ab69cc525510f19ece17e325b98
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: x86_64
Installed-Size: 30720
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_x86_64.ipk
Size: 7452
SHA256sum: a849fd176ff71b9b230773e44a6afe3def9deffad034ca18ea723d5915b043fb
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: x86_64
Installed-Size: 92160
Filename: ndppd_0.2.5-r2_x86_64.ipk
Size: 34339
SHA256sum: 9584a637bcb02f18914b77aeef8252c9b6657caf8ed52cb816c4d80145198ade
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: x86_64
Installed-Size: 143360
Filename: nodogsplash_5.0.2-r1_x86_64.ipk
Size: 48379
SHA256sum: c6f9fb830f3c2980869283cc3718d7e4f594c98e78479788aec29cf42e972a8e
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 11960
SHA256sum: 5acc1603330a370c57e7bd279f9644c870a6d16eaa5edcbdb032fc2653dc6ba7
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 2778
SHA256sum: e02d53e5f20680bd3f8ae34bf4f2c32dd5f60bc9d3dcefa5207af5b362261d59
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 12995
SHA256sum: fd25ef5cdcaece3e7640bdc403e757fd93c303c3e807a2525e42259684fb702e
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 4485
SHA256sum: 596de0a084cabd4d30c8652847f11235ea0d37c63e9858c5ce9d375f123e3560
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3090
SHA256sum: 7dcd21650d9cc916e241ff4c3f4de7eaf4fb17686edf7e2650a7ff6691bd1020
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 4847
SHA256sum: 6365b0a81357b24c18a917e72286f4502fe020d01a978febab12b635a8098858
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3326
SHA256sum: 0d3c7f1319ee4b733d06e7bcdf3c1bc10da304a7eaed18194dadbb9777627e6e
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 31437
SHA256sum: 33a24a9fa9315d2ff007674e4f9b38ef9c545f318b86c9a0e3066427d8358a26
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 23243
SHA256sum: 698c5572dca7d3b99ba97cabbbb607c2215197b5519fb1c0a6fd542a42ae2e9a
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 9959
SHA256sum: ee9f2b1854383981994913c8c560ce73566814208561ff535e604526d599bc5d
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 11704
SHA256sum: 1c83cbea3c9c80232e361fcb1c1be0a6076165cdaefa6aba6437b2c974e83be0
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 13896
SHA256sum: 912bf2432914ab0f58c469925afc7dc0cb6963d14943a3a8be873029f7c60840
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 9428
SHA256sum: e531517f9d0fe0d8f01e20ddaa4e2d0b06c60b6860ee840276ab221786f3974e
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3703
SHA256sum: 9ae41dbb558e7d50755d903c95b59d1c4c389a0c496f6c7e52227fd468157bf5
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 194560
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 62564
SHA256sum: c7852f284fcf50dd03edd9b531def49364a3a1a3c58b0ff884935a263bb5a28f
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 7111
SHA256sum: ede71dff368fe1cada0a12ed5603efa9380571451e43ec3105d21d4c5c19bb95
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 10717
SHA256sum: 285b5c9da7fa7c7ed605290bc8da3a7e252f85f95dadd38e58310f36f9774d71
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 5339
SHA256sum: 72719e62a594805c0053c6e05268e6d3b85d634659069add6bc321c03d56c966
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 15298
SHA256sum: 9edbe5bb8dfeb9bacd530e6bf39e1e5c30401e621660fb22a60315b6a3fcdf2a
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 2434
SHA256sum: a9f53dc8a55eceee743f682009cf1ffaf3e7cd49acc7065fad37d21bf2b2d39e
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 1945
SHA256sum: 3a033673ec717c8866ca0324cee66df40aac900b51b4e41b5843b7a92f86d61f
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 327680
Filename: olsrd_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 139721
SHA256sum: a27c49c2fa9393639162c2227be46b301a9e21e456e4f921c42552f4d9307148
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 450560
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_x86_64.ipk
Size: 183065
SHA256sum: e5587d1921f78a911e4d5a95f59ab4a2333ec4d0abf8450079e63adce418121c
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_x86_64.ipk
Size: 177586
SHA256sum: 54670916a323250bdf6cbb290c5aaaa73c4938d5ef13689048fb83c507939a76
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2302
SHA256sum: a2c99c6fd228323d838167672586b529d98186b51527f79be95fd8e6dfccd72a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 645120
Filename: oonf-olsrd2_2022.08.25~1cec9b21_x86_64.ipk
Size: 259847
SHA256sum: 1050a8eb0ea2c299573cbed7b1298d79782c50ebf15dbb893606563452b1bb1c
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: x86_64
Installed-Size: 563200
Filename: opennds_10.2.0-r1_x86_64.ipk
Size: 159215
SHA256sum: 4ef920679df6c93a25042fe4ae712ecbed65a2438eecc9a949a5270598a2bce6
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: x86_64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_x86_64.ipk
Size: 88729
SHA256sum: c259577ca182e6ac522cde17793d03c86e57e6f9fd1ac70f38abe26cea9249da
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: x86_64
Installed-Size: 112640
Filename: prince_0.4-r3_x86_64.ipk
Size: 31287
SHA256sum: ca451a19525b39a4c477473bf76e0210530790bc21e3e9cc40a7a45541480a49
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 40960
Filename: vis_2013.04.07~7710cce4-r9_x86_64.ipk
Size: 11661
SHA256sum: 76a6e1877dd0c3b27d55daed43f2ec599932053e51b00647a528c405a7c9eb7e
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 9722
SHA256sum: b67ca25a8d40f9374e6bb1dc2290ed79c4ed9edd2383274cc26b979adb436dd5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.